Social bookmarks View shopping basket Print this page Mail to friend

News

Newsticker Index

12.05.2012 | 11:35 CET

Synchronisation is up and running

09.05.2012 | 17:48 CET

Assets of UEMIS have been sold

09.09.2011 | 09:00 CET

Important information to website users

30.06.2011 | 15:00 CET

Official Notice regarding Uemis AG

08.06.2011 | 13:16 CET

Updated information about the Trimix Upgrade (2)

11.02.2011 | 08:55 CET

Updated information about the Trimix Upgrade

02.11.2010 | 15:54 CET

Information about the Trimix Upgrade

14.09.2010 | 15:04 CET

uemis ZURICH: Firmware Version 1.20 / Gauge Mode available

02.03.2010 | 16:39 CET

Gewinnspiel boot 2010

10.12.2009 | 10:23 CET

TRIMIX software upgrade available in 2010

14. September 2010 | 15:04 CET

uemis ZURICH: Firmware Version 1.20 / Gauge Mode available

Bugfixes:

Imperial units:

  • After "resuming", some imperial data was not rounded correctly

Update of dive settings:

  • If the dive settings were changed and the views were not checked out with EXIT, the database was not updated with the new settings. After "resuming", the previous settings were not updated with the new settings.

Changes and new features:

Extended range for dive settings:

  • lowest possible tank reserve pressure is now 400psi
  • deepest safety stop depth is now 20ft

Gauge mode:

  • A Gauge mode with stopp watch has been added. An addendum of the manual has to be read before the use of the gauge mode. There is a 48 hour locking period before you can switch back to deco mode after a dive in gauge mode.

ATTENTION:
Firmware v1.08 or newer is necessary on your SDA to install v1.20.