Social bookmarks View shopping basket Print this page Mail to friend

News

Newsticker Index

12.05.2012 | 11:35 CET

Synchronisation is up and running

09.05.2012 | 17:48 CET

Assets of UEMIS have been sold

09.09.2011 | 09:00 CET

Important information to website users

30.06.2011 | 15:00 CET

Official Notice regarding Uemis AG

08.06.2011 | 13:16 CET

Updated information about the Trimix Upgrade (2)

11.02.2011 | 08:55 CET

Updated information about the Trimix Upgrade

02.11.2010 | 15:54 CET

Information about the Trimix Upgrade

14.09.2010 | 15:04 CET

uemis ZURICH: Firmware Version 1.20 / Gauge Mode available

02.03.2010 | 16:39 CET

Gewinnspiel boot 2010

10.12.2009 | 10:23 CET

TRIMIX software upgrade available in 2010

11. February 2011 | 08:55 CET

Updated information about the Trimix Upgrade

The planning and the execution of a trimix dive should be safe, reliable and simple with the help of a uemis ZURICH. We want to further increase the user friendly operation and make a firmware available, which meets the needs of all users – from the beginner to the tek diver. The upgrade will elate not only the trimix diver, but also offer new features for the air- and nitrox diver. Till then, we will publish news for the new firmware here.

This edition presents the new gas settings:

  1. Depending on the user profile, 4 categories of templates are provided (Air, EAN, EAN 2T/3T and Trimix). The currently selected template (gas configuration) is displayed beween squared brackets angezeigt. If the gas configuration of the template should be used, it can be selected wit OK. Further settings are not necessary.
  2. This shows the changeable templates (gas configurations). Up to 9 templates can be defined. The template name is generated automatically by the SDA and include the gas of the template category (TX), the MOD of the Bottom-Mix (D067 = 67m) and the number of tanks used by the template (3T). With the selection of the template, all tanks defined in the template will be directly accepted.
  3. This shows the tank view for the current template. A gas configuration can include up to six tanks. The start tank can be selected with the OK button. The tank name is generated automatically by the SDA and include the gas (TX18/45) and the tank size (V15 = 15 liters).
  4. The gas settings of each tank can be configured in the gas view. MOD and END are displayed for the current settings. A warning sign will show up, if the END exceeds the maximum value set in the limits setting of the SDA. Imperial units will also be available.

The next edition will be published asap. A date for the release of the firmware 2.00 will be published only a short period before it is ready.